A garage door usually works day after day without giving you problems. That makes it easy to take the door for granted and assume it will always work. However, sooner or later, something might go wrong with your door leaving it stuck in the open or closed position. One possible reason for the door not opening is when there's a problem with the door arm and bracket. Here's how these parts are supposed to work and the repairs that could be needed when the bracket develops a problem.

The Purpose Of The Arm And Bracket

The arm is what lifts the garage door. One end is attached to the pulley that supplies the power to lift the door and the other end is attached to the garage door with a bracket. When the arm pulls away from the bracket, the door won't go up and you'll probably need to call a garage door repair service to fix the problem.

The Problems That Can Develop With The Bracket

Since a garage door is quite heavy, a lot of strain is placed on the bracket every time the door opens. Over time, this strain can cause the parts to wear down. Screws might work loose and the metal bracket might bend or warp. When this happens, the bracket can pull away from the door or the arm might come out of the bracket.

The Repairs That Might Be Necessary

A residential garage door repair service will check the problem and decide on the right repairs. When it comes to a bent or broken bracket, replacing the bracket with new parts will probably be recommended. This might require taking the door partially apart so the bracket can be reached easily. One thing the repair professional may consider is if the new bracket could use additional reinforcement so the problem doesn't happen again.

Once the new bracket is in place, the door arm is attached to it securely and then the door is run through the open and close cycles to ensure the bracket and arm are working properly. Replacing a garage door bracket isn't necessarily a major repair, but it's an essential one because a broken bracket keeps your door from working. Doing the repair correctly is also important since the bracket supports the full weight of the door and garage door safety is a top priority.

It's good to keep up with garage door maintenance because then you may notice loose screws so you can tighten them before the bracket is pulled out of the door. If you notice problems with the bracket, such as bending or being loose, you can call for a residential garage door repair service before you have an emergency where your car is stuck inside the garage.

Share